Search

How to Replace Your Omni One Base

  • Updated

Overview
If your Omni One base needs to be replaced, follow this step-by-step guide to safely remove the existing base and install a new one. 

Step 1: Prepare for Disassembly

  • Ensure you have a clear workspace and have enough space to maneuver the base safely.

Step 2: Remove the Existing Base

1. Remove the Vest

  • Unclip the shoulder button and cable from the vest.
  • Pull the release lever and lift the vest up to remove it from the arm.

2. Unlock the Arm

  • Press the shoulder button to unlock the arm’s rotation.

3. Loosen the Base

  • Pull gently from under the base until you feel it rise up.
  • Repeat this process around the entire circumference of the base to loosen it evenly.

4. Lift the Base

  • Using proper lifting techniques, carefully lift the base upward.
  • Make sure you have space to step backward and avoid hitting the arm.

Step 3: Install the New Base

1. Get the New Base Ready

  • Position the new base and align the grooves on the base with the ridges on the metal frame.
  • Pick one ridge and groove as a reference point and align it properly.

2. Lower the Base

  • Carefully place the new base in position, aligning it with the ridges on the metal frame.

3. Check Alignment

  • Look underneath the base to verify that it is correctly seated and aligned.

4. Secure the Base

  • Lock the base into place by pressing down on the edge.
  • Continue this process around the entire circumference of the base while moving the arm out of the way as needed.

 

Step 4: Reassemble and Test

1. Lock the Arm

  • Press the shoulder button to lock the arm and ensure that the arm is in the locked position.

2. Lock the Vest and Route the Cable

  • Place the vest back into the arm’s locking mechanism until the red label disappears.
  • Clip the shoulder button back onto the vest strap.
  • Ensure all cables are properly routed through the designated clips.

3. Test Stability

  • Step onto the base and check for stability before resuming gameplay.

 

 

Safety Tips

  • Always lift with your legs, not your back, to avoid injury.
  • Ensure the base is fully secured before using Omni One.

Your new Omni One base is pre-conditioned and should not require Easy-Walk initially. Only apply 1-2 sprays max if you feel the base has too much friction.

Related to